SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 189 2018-05-08
12 AT Command for NTP function
12.1 Overview
Command Description
AT+CNTPCID Set GPRS bearer profile’s ID
AT+CNTP Synchrosize network time
12.2 Detailed Descriptions of Commands
12.2.1 AT+CNTPCID Set GPRS Bearer Profile’s ID
AT+CNTPCID Set GPRS Bearer Profile’s ID
Test Command
AT+CNTPCID=?
Response
+ CNTPCID: (range of supporded <cid>s)
OK
Parameters
See Write Command
Read Command
AT+CNTPCID?
Response
+ CNTPCID: <cid>
OK
Parameters
See Write Command
Write Command
AT+CNTPCID=<ci
d>
Response
OK
If error is related to ME functionality:
ERROR
Parameters
<cid> Bearer profile identifier, refer to AT+SAPBR
Parameter Saving
Mode
-
Max Response Time
-
Reference Note
12.2.2 AT+CNTP Sychronize Network Time
AT+CNTP Synchronize Network Time
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English