SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 70 2018-05-08
+CMGW: <index>
OK
If error is related to ME functionality:
+CMS ERROR: <err>
Parameter Saving
Mode
NO_SAVE
Max Response
Time
5s
Reference
3GPP TS 27.005
Note
4.2.7 AT+CMSS Send SMS Message from Storage
AT+CMSS Send SMS Message from Storage
Test Command
AT+CMSS=?
Response
OK
Write Command
AT+CMSS=<ind
ex>[,<da>,<toda
>]
Response
TA sends message with location value <index
> from message storage
<mem2> to the network (SMS-SUBMIT). If new recipient address <da
> is
given, it shall be used instead of the one stored with the message. Reference
value <mr
> is returned to the TE on successful message delivery. Values
can be used to identify message upon unsolicited delivery status report
result code.
1) If text mode(+CMGF=1) and sending successful:
+CMSS: <mr>
OK
2) If PDU mode(+CMGF=0) and sending successful:
+CMSS: <mr>
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<index> Integer type; value in the range of location numbers
supported
by the associated memory
<da> GSM 03.40 TP-Destination-Address Address-Value field in
string format(string should be included in quotation marks); BCD numbers
(or GSM default alphabet characters) are converted to characters of the
currently selected TE character set (specified by +CSCS in 3GPP TS
27.007); type of address given by <toda>
<toda> GSM 04.11 TP-Destination-Address Type-of-Address octet
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English