SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 211 2018-05-08
15.2.8 AT+CGNSMOD GNSS Work Mode Set
AT+CGNSMOD GNSS Work Mode Set
Test Command
AT+CGNSMOD
=?
Response
+CGNSMOD: (list of supported <gps mode>),( list of supported <
glo
mode>s),( list of supported <bd mode>s),( list of supported <gal mode>s)
OK
Parameters
See Write Command
Read Command
AT+CGNSMOD
?
Response
+CGNSMOD: <gps mode>,<glo mode>,<bd mode>,<gal mode>
OK
Write Command
AT+CGNSMOD
=<gps
mode>,<glo
mode>,<bd
mode>,<gal
mode>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<GPS mode> GPS work mode
1 Start GPS NMEA out
<glo mode> GLONASS work mode
0 Stop GLONASS NMEA out
1 Start GLONASS NMEA out
<bd mode> BEIDOU work mode
0 Stop BEIDOU NMEA out
1 Start BEIDOU NMEA out
2 BEIDOU outside of us
<ga mode> GALILEAN work mode
0 Stop GALILEAN NMEA out
1 Start GALILEAN NMEA out
2 GALILEAN out side of us
Parameter Saving
Mode
AUTO_SAVE_REBOOT
Max Response
Time
-
Reference Note
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English