SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 152 2018-05-08
9 AT Commands for HTTP Application
SIM7000 series has an embedded TCP/IP stack that is driven by AT commands and enables the
host application to easily access the Internet HTTP service. This chapter is a reference guide to
all the AT commands and responses defined to use with the TCP/IP stack in HTTP Service.
9.1 Overview
Command Description
AT+HTTPINIT
Initialize HTTP service
AT+HTTPTERM Terminate HTTP service
AT+HTTPPARA
Set HTTP parameters value
AT+HTTPDATA Input HTTP data
AT+HTTPACTION HTTP method action
AT+HTTPREAD Read the HTTP server response
AT+HTTPSTATUS Read HTTP status
AT+HTTPHEAD
Read the HTTP header information of server response
AT+HTTPTOFS
Download file to ap file system
9.2 Detailed Descriptions of Commands
9.2.1 AT+HTTPINIT Initialize HTTP Service
AT+HTTPINIT Initialize HTTP Service
Test Command
AT+HTTPINIT=
?
Response
OK
Execution
Command
AT+HTTPINIT
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
HTTPINIT should first be executed to initialize the HTTP service.
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English