SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 75 2018-05-08
Message Paramete
rs +CSMP are restored. Certain settings may not be
supported by the storage (e.g. (U)SIM SMS parameters) and therefore can
not be restored.
OK
ERROR
Parameter
<profile> 0 Restore SM service settings from profile 0
Execution
Command
AT+CRES
Response
Same as AT+CRES=0.
OK
If error is related to ME functionality:
+CMS ERROR <err>
Parameter Saving
Mode
NO_SAVE
Max Response
Time
5s
Reference
3GPP TS 27.005
Note
4.2.11 AT+CSAS Save SMS Settings
AT+CSAS Save SMS Settings
Test Command
AT+CSAS=?
Response
+CSAS: list of supported <profile>s
OK
Parameter
See Write Command
Write Command
AT+CSAS=<prof
ile>
Response
Execution command saves active message service settings to a non-
volatile
memory. Settings specified in commands Service Centre Address +CSCA
and
Set Message Parameters +CSMP are saved. Certain settings may not be
supported by the storage (e.g. (U)SIM SMS parameters) and therefore can
not be saved.
OK
ERROR
Parameter
<profile> 0 Save SM service setting in profile 0
Execution
Command
AT+CSAS
Response
Same as AT+CSAS=0
OK
If error is related to ME functionality:
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English