Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 27 2018-05-08
ATS8=<n> OK
ERROR
Parameters
<n> 0-2-255 The value of this register determines how long the
modem should pause when it sees a comma in the dialing string.
Mode
-
Time
-
Reference
V.25ter
Note
No effect in GSM
2.2.18 ATS10 Set Disconnect Delay after Indicating the Absence of Data Carrier
ATS10 Set Disconnect Delay after Indicating the Absence of Data Carrier
ATS10?
<n>
OK
Parameters
Write Command
ATS10=<n>
Response
This parameter setting determines the amount of time that the TA will
remain connected in absence of data carrier. If the data carrier is once more
detected before disconnecting, the TA remains connected.
OK
ERROR
Parameters
<n> 1-14-255 Number of tenths seconds of delay
Mode
Time
-
Reference
V.25ter
Note
2.2.19 ATV TA Response Format
ATV TA Response Format
Execution
Response
This parameter setting determines the contents of the header and trailer