Simex multicon cmc-99 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
• in
Output value
parameter in the
Point 1
section write
0°C
,
• in
Input value
parameter in the
Point 2
section write
20
,
• in
Output value
parameter in the
Point 2
section write
20°C
,
– for
Display
block parameters:
•
Format
parameter set as
numeric
,
•
Precision
parameter set as
0.0
,
• in
Graph low
write
10°C
,
• in
Graph high
write
50°C
,
– using the arrows in the top navigation bar, select any
Logical channel
such as 2,
– in
Name
parameter write
Temperature 2
,
–
Mode
parameter set as
Modbus
,
–
Port
parameter set as
MB1 (MASTER)
,
–
SLAVE device
parameter set as
Addr.8:“Temp. converter”
,
–
Device input
parameter set as
Inp.2:HR 1h,b0-15
that reads
Register 1h
from
SLAVE 2
device,
– all other parameters you should set like in previously configured logical channel,
In the next step you need to define
Group
the set up logical channels to view them in one
window on the screen. To do this:
– enter the
Group
menu, to enable the
Group 1
if it is off,
– in
Name
parameter write
Temperature
,
– for
Channels
block parameters:
•
Slot 1
parameter set as
logical channel 1
called the
Temperature 1
,
•
Slot 2
parameter set as
logical channel 2
called the
Temperature 2
,
• other parameters in this block –
Slot 3÷6
, set as
disabled
, because we want to
show only two logical channels,
– all other parameters should be on default settings,
The last step is to define the
Initial view
displayed on the LCD screen the device starts. Initial
View has to display a defined Group of logical channels: 1, 2 in values mode. To do this:
– enter
General settings
menu,
– for
Initial view
block parameters,
•
Display mode
parameter set as
values
,
•
Displayed group
parameter set as
Group 1: Temperature
,
After whole configuration exit the menu pressing
Save changes
, the result will be visible
as soon as first measurement is done.
126

Simex multicon cmc-99 Specifications

General

Brand	Simex
Model	multicon cmc-99
Category	Controller
Language	English