Simex multicon cmc-99 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
4.4. MAINTENANCE
The unit does not have any internal replaceable or adjustable components available to
the user. Pay attention to the ambient temperature in the room where the unit is operating.
Excessively high temperatures cause faster ageing of the internal components and shorten
the fault-free time of the unit's operation.
In cases where the unit gets dirty do not clean with solvents. For cleaning use warm water
with small amount of detergent or in the case of more significant contamination ethyl or
isopropyl alcohol.
Using any other agents can cause permanent damage to the housing.
Product marked with this symbol should not be placed in municipal waste. Please
check local regulations for disposal of electronic products.
5. INTRODUCTION TO MultiCon CMC-99/141
5.1. UNDERST ANDING CONTROLLER/DATA RECORDER MultiCon CMC-99/141
The
MultiCon CMC-99/141
device was developed as a universal multichannel
controller. To maintain this concept its firmware was written with multi level structure. The
device runs under the control of a LINUX operating system keeping all subsystems ready to
use and allowing independent and simultaneous operation of many processes
(communication, data acquisition, post-processing, visualisation etc.). Such an approach
gives great advantages to high level applications, making it flexible and dynamically
configurable. Similarly data structures and streams were implemented in quite a different way
than in most similar devices. The main difference is the concept of using
Logical Channels
as a bridge: physical inputs and outputs - visualisation and controlling processes. Designers
of
MultiCon CMC-99/141
decided to use such solution to increase functionality of the device
and make software near fully independent on the hardware.
31
!

Simex multicon cmc-99 Specifications

General

Brand	Simex
Model	multicon cmc-99
Category	Controller
Language	English