Simex multicon cmc-99 User Manual

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Attachment with
Groups
has following structure:
File name:
serial_number_
Gr_
data
_
hour
_
minute
_
second
_msgID=
Message_number
_
Suffix
.csv
File content – first row:
“Group Number”,”Group Name”,“Channel Number”,”Channel Name”,”Value”,”Unit”
File content – next rows:
Group_number
,”
Group_name
”,
Channel_number
,”
Channel_name
”,
Channel_value
,”
Unit
”
Each Logical channel from each Group is stored in new line of the file.
Where: on
black
constant elements are written,
on red are written elements which are dependent on triggering and the device state
but all of these elements must be included.
The content of attached file can be slightly different depending on
Decimal separator
parameter (see description of
Decimal separator
parameter in
Chapter 7.7. GENERAL SETTINGS
)
In case when selected to send Channel is disabled (or Group with disabled Channel)
the name of this Channel will be
“disabled”
and its unit will be
“null”
.
Alarm states (-ERR-, -LO-, -HI- etc.) of Logical channels are not included in the
attachment but only current values.
The parameters on the Notifications menu are:
–
E-mail configuration
– menu which contains sender account parameters,
•
Mode
– switches notifications on and off:
◦
disabled
,
◦
enabled
,
•
Sender name
– text which will be displayed in Name field in user's e-mail
account.
•
Sender address
– sender e-mail address which will be used by the device to
send messages to recipients,
•
Login
– sender e-mail account login,
•
Password
– sender e-mail account password (every sign is displayed as an
asterisk,
•
SMTP server
– sender e-mail account server address,
•
SMTP port
– sender e-mail account server port number,
•
Security
– security mode which is used by sender's e-mail server,
◦
not encrypted
– no security,
◦
TLS
– server is using TLS security mode,
◦
SSL
– server is using SSL security mode,
•
Retry every [min]
– parameter which describes how much time must elapse
before the device will try to send messages again after failure,
–
Messages
– menu which defines up to 32 messages,
•
Mode
– switches on and off particular message,
◦
disabled
,
◦
enabled
,
•
Recipient(s)
– parameter which contains e-mail address (addresses) of the
recipient (recipients). All recipients must be separated from each other with
comma or comma and space signs but there can not be more than 78 signs in
total,
232
i
i
i

Simex multicon cmc-99 Specifications

General

Brand	Simex
Model	multicon cmc-99
Category	Controller
Language	English