Simex multicon cmc-99 - Page 296

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
Obtaining specified log informations (cmd=log):
To obtain specified log information a
log
parameter can be used. There must be
specified additional parameters:
1)
log_name
– is the name of log,
2)
file
– is the type of requested data. This parameter can be one of:
-
log_files
– list of log files,
-
chan_conf
– list of channels configuration,
-
group_settings
– group settings,
-
conf_xml
– other internal settings,
Example of viewing list of log files in log gX_YYYY_MM_DD_hh_mm_ss use this query
syntax:
http://<IP_address>/cgi-bin/data.cgi?cmd=log&log_name=gX_YYYY_MM_DD_hh_mm_ss&file=log_files
Obtaining recorded data (cmd=part):
To obtain recorded data
part
parameter can be used. There must be specified additional
parameters:
1)
log_name
– is the name of log,
2)
part_no
– is the number of data file,
-
samples
– returns recorded channels data,
-
timestamp
– returns recorded time stamps,
-
raster
– returns samples interval,
If there is no
id_first
nor
id_last
specified the whole data file will be returned. When
requesting
samples
, file size can be even
1MB
.
296
i