Simex multicon cmc-99 - Page 82

User Manual For - CONTROLLER/DATA RECORDER MultiCon CMC-99/141
•
Source X
parameter set as logical channel where the temperature
measurement is shown,
•
Type of source Y
parameter set as:
channel
,
•
Source Y
parameter set as logical channel named as
First level
,
–
Precision
parameter set as
0.0
,
–
Graph low
parameter set as:
-50
,
–
Graph high
parameter set as:
85
,
–
All other parameters should be set as default,
Logical channel 5: Calculating the time of the second alarm,
–
In
Name
parameter write:
Calc. Second level
,
–
Mode
parameter set as:
Math function
,
–
Click on the
Function
button,
•
Function
parameter set as:
X – Y
,
•
Source X
parameter set as logical channel where the temperature
measurement is shown,
•
Type of source Y
parameter set as:
channel
,
•
Source Y parameter
set as logical channel named as
Second level
,
–
Precision
parameter set as
0.0
,
–
Graph low
parameter set as:
-50
,
–
Graph high
parameter set as:
85
,
–
All other parameters should be set as default,
Logical channel 6: Calculating the time of the third alarm,
–
In
Name
parameter write:
Calc. Third level
,
–
Mode
parameter set as:
Math function
,
–
Click on the
Function
button,
•
Function
parameter set as:
X – Y
,
•
Source X
parameter set as logical channel where the temperature
measurement is shown,
•
Type of source Y
parameter set as:
channel
,
•
Source Y
parameter set as logical channel named as
Third level
,
–
Precision
parameter set as
0.0
,
–
Graph low
parameter set as:
-50
,
–
Graph high
parameter set as:
85
,
–
All other parameters should be set as default,
Logical channel 7: Temperature measurement:
–
In
Name
parameter write:
Temperature
,
–
Mode
parameter set as:
Hardware input
,
–
Source
parameter set as:
Inp.A4 : Intern.temp
,
–
Precision
parameter set as:
0.0
,
–
In
Graph low
parameter write:
-50
,
–
In
Graph high
parameter write:
85
,
–
Now go to
Channel highlight
submenu:
•
Highlight color
parameter set as:
1
,
◦
Mode
parameter set as:
permanent
,
◦
In
Trig.hold time
parameter write:
5
,
◦
Trigger
parameter set as logical channel named
Calc. Third level
,
◦
Alarm state
parameter set as:
no highlight
,
◦
Now, go to
Color
parameter and set font color (at the top of screen)
and background color (at the bottom of the screen),
82