1. Safety instructions
ENEN
1.4 Electric shock hazard 1.5 Operation
The following must be observed while
working on the product.
o All information within this manual and
the information within the referenced
documents
o All laws and regulations that the operator
must observe
All relevant persons (operating personnel,
supervisors) must be informed of the
activity prior to beginning work.
Precautionary operational measures / work
instructions must be observed.
o Take appropriate measures to ensure
that moving/detached parts are im-
mobilized during the work and that no
body parts can be pinched by unintended
movements.
o Assemble the product only outside the
operating range of moving parts, at an
adequate distance from sources of heat
or cold.
o Prior to performing work, the product
and the machine/system in which the
product will be integrated must be de-
energized and depressurized and secured
against unauthorized activation.
o All work on electrical components may be
performed only with voltage-insulated
tools.
1.6 Assembly/maintenance/malfunction/
decommissioning/disposal
WARNING
Electric shock
Work on the Lubrication Monitor
Controller may be performed only
by qualified and trained person-
nel authorized to do so by the
operator.
De-energize the product prior to
beginning work.
Local electrical operating condi-
tions regulations (e.g., DIN, VDE)
must be observed.
Serious injury or death and prop-
erty damage may result from im-
properly connected products.
10
To Next Page
Loading...
