4.3.2 General notes
o The product(s) can be enveloped in plastic
film to provide low-dust storage.
o Protect against ground moisture by stor-
ing on a shelf or wooden pallet.
o Bare metallic surfaces must be protected
using anti-corrosion agents. Check corro-
sion protection every 6 months and reap-
ply if necessary.
Immediately after receipt, the delivery must
be checked for completeness according
to the shipping documents. Any transport
damage must be reported to the transport
company immediately. The packaging mate-
rial should be preserved until any discrep-
ancies are resolved.
4.3.1 Electronic and electrical devices
o Dry and dust-free surroundings, storage
in well ventilated dry area
o Storage time: max. 24 months.
o Relative humidity: < 65%.
o Storage temperature: -40 to +70°C.
o No direct sun or UV exposure
o Protected against nearby sources or heat
or cold
4.1 Checking the delivery
4.2 Returns
WARNING
Personal injury/property damage
Do not drop the product.
4.3 Storage
The following conditions apply to storage:
Before return shipment, all parts must be
cleaned and properly packed (i.e., accord-
ing to the requirements of the recipient
country). There are no restrictions for land,
air, or sea transport.
The following must be marked on the
packaging of return shipments:
To Next Page
Loading...
Need help?
General
