SKF LMC 301 series - Note on the Rating Plate; Information on CE Marking

5. Assembly
SKF Lubrication Systems Germany GmbH
Made in Germany D-69190 Walldorf
02/16
M
odel: LMC 301
2
016100024/001 A
0865..
Serial-No:
P.No.:
S-No:
I= 4 A
2016100024/001 A
U=
Proc.
Cont.
Eq.
EN
39
5
5.4 Note on the rating plate
The rating plate provides important data
such as the type designation, order number,
etc.
To avoid loss of this data in case the rating
plate becomes illegible, these characteristics
should be entered in the manual.
P No. ________________________________
S No. ________________________________
Model ________________________________
5.5 Information on CE marking
The CE marking is based on the require-
ments of the applied Directives:
o 2014/30/EU
Electromagnetic Compatibility
o 2011/65/EU(RoHS II) Directive on the
restriction of the use of certain hazard-
ous substances in electrical and electronic
equipment
o 2014/35/EU Low-Voltage Directive
Note on Pressure Equipment Directive
2014/68/EU
(if pressurized parts are present)
Due to its performance characteristics, the
product does not reach the limit values
defined in Article 4, Paragraph 1, Subpara-
graph (a) item (i) and is, pursuant to Article
4, Paragraph 3, excluded from the scope of
Pressure Equipment Directive 2014/68/EU.
Rating plate, Fig. 20