SKF LMC 301 series User Manual

8. Maintenance
Dispose of electronic components and
plastic in an environmentally friendly way
EN
79
8
Inspection
Item Compo-
nent
Inspection Remedy
1 LMC 301
o Check that all cable glands
are securely connected on a
regular basis
o Check that housing is se-
curely connected
• Tighten cable glands if necessary
• Tighten assembly mounting screws
if necessary - see Chapter 5.2.3
• See battery replacement in Chapter
8.3
• See fuse replacement in Chapter
9.1
• See software update in Chapter 8.4
2
o Battery replacement
o Fuse replacement
3
o Install software update
8.2 Maintenance schedule
The maintenance intervals are system-
specific and are affected by environmental
influences such as dust and temperature.
The maintenance intervals are therefore
defined by the system manufacturer/
operator based on the specific operating
conditions.

SKF LMC 301 series Specifications

General

Brand	SKF
Model	LMC 301 series
Category	Controller
Language	English