CAUTION!
Do not use rigid connection pipes!
ACHTUNG!
keine starren Elektroinstallations-
rohre verwenden!
PUMP A B C
RUN
LL
FAULT
POWER
RESET
LMC 301
14
The customer installs the cable glands and the cable sets provided by the customer.
The customer is therefore responsible for their correct installation.
See the “Accessories” chapter, page 91, for UL-certified cable glands and protective hoses.
A rigid connecting pipe must not be used when installing the power leads (provided by customer)
(see decal information (1) on the bottom of the controller).
1
To Next Page
Loading...
