SKF Lubrication Systems Germany GmbH
2. Industriestraße 4 · 68766 Hockenheim · Germany
Tel. +49 (0)62 05 27-0
Fax +49 (0)62 05 27-101
www.skf.com/lubrication
SKF Lubrication Systems Germany GmbH
Motzener Straße 35/37 · 12277 Berlin · Germany
PO Box 970444 · 12704 Berlin · Germany
Tel. +49 (0)30 72002-0
Fax +49 (0)30 72002-111
www.skf.com/lubrication
The Power of Knowledge Engineering
Over the course of more than a century, SKF has specialized in five fields of competence and
acquired a wide range of application expertise. We utilize this experience to provide innovative
solutions to OEMs and other manufacturers in practically all industrial sectors worldwide. Our five
fields of competence are: Bearings and bearing units, seals, mechatronics (combining mechanical
and electronic components to improve the performance of classic systems), and extensive
services from 3-D computer stimulations and modern condition monitoring systems for high
reliability to system management SKF is a leading global company and guarantees its customers
uniform quality standards and global product availability.
Important information on product usage
All products from SKF may be used only for their intended purpose as described in this
brochure
and the operating instructions. If operating instructions are supplied together with the products,
they must be read and followed.
Not all lubricants can be fed using centralized lubrication systems. SKF can, on request, inspect
the suitability of the lubricant selected by the user for pumping in centralized lubrication
systems. Lubrication systems and their components manufactured by SKF are not approved for
use in conjunction with gases, liquefied gases, pressurized gases in solution, vapors, or such
fluids whose vapor pressure exceeds normal atmospheric pressure (1013 mbar) by more than
0.5 bar at their maximum permissible temperature.
Particular attention is called to the fact that hazardous materials of any kind, especially the
materials classified as hazardous by EC Directive 67/548/EEC, Article 2, Para. 2, may only be
filled into SKF centralized lubrication systems and components and delivered and/or distributed
with such systems and components after consulting with and obtaining written approval
from SKF.
Bearings
and Bearing
Units
Seals
Lubrication
Systems
Mechatronics
Serv-
ices
!
To Previous Page
Loading...
Need help?
General
