EN
Explanation of symbols and signs
Abbreviations and conversion factors
Abbreviations
re regarding oz. ounce
approx. approximately psi pounds per square inch
°C degrees Celsius hp horsepower
s seconds lb. pound
dB (A) sound pressure level sq.in. square inch
i.e. that is kp kilopond
etc. et cetera cu.in. cubic inch
poss. possibly mph miles per hour
< less than fpsec feet per second
± plus or minus °F degrees Fahrenheit
> greater than fl.oz. fluid ounce
e.g. for example in. inch
if
necessary
if necessary gal. gallon
etc. et cetera
usually usually
Ø diameter
Conversion factors
incl. including Length 1 mm = 0.03937 in.
K Kelvin Area 1 cm² = 0.155 sq.in.
kg kilogram Volume 1 ml = 0.0352 fl.oz.
RH relative humidity 1 l = 2.11416 pints (US)
kW kilowatt Mass 1 kg = 2.205 lbs
l liter 1 g = 0.03527 oz.
min minute Density 1 kg/cm³ = 8.3454 lb./gal.
(US)
max. maximum 1 kg/cm³ = 0.03613 lb./cu.in.
min. minimum Force 1 N = 0.10197 kp
mm millimeter Speed 1 m/s = 3.28084 fpsec
ml milliliter 1 m/s = 2.23694 mph
N Newton Acceleration 1 m/s² = 3.28084 ft./s²
Nm Newton meter Pressure 1 bar = 14.5 psi
Temperature °C = (°F-32) x 5/9
Power 1 kW = 1.34109 hp
Instructions placed on a unit, machine, or
equipment, such as:
o Rotation arrow
o Fluid connection labels
o Warnings
must be followed and kept in fully legible
condition.
7
To Next Page
Loading...
