Skycut D Series - Page 68

68
Material Type Material Brand/Source Blade Passes Force Speed Other Comments
Tracing Paper Helix Vellum Paper R 1 30 8
Vinyl - Heat Transfer Siser EasySubli - with the mat R 1 30 8 Cut on the mat
Vinyl - Heat Transfer
Siser Glitter - Gold - No cutting
mat
R 2 35-40 7
2 passes makes it easier to weed, also slight
scratch cut in the backing layer
Vinyl - Heat Transfer
Siser Glitter - Gold - with the
mat
R 2 45-50 7
2 passes makes it easier to weed, also slight
scratch cut in the backing layer
Vinyl - Wall (no mat) Vinyl - Oracal 631 - yellow R 1 25 8
Vinyl - Wall (on mat) Vinyl - Oracal 631 - yellow R 1 30 8
Vinyl - Waterproof Papilio R 1 30 8