101
3 - Pre-infeed activation
This function can enable the signal for activation of an external conveyor belt mounted before
the machine.
4 - Multifunction relay management
If you select “NONE”, the relay is not active.
If you select “PRINTER”, the relay 4 gives an impulse of 500 ms synchronized with the sealing.
Fig. 9.17.3
Fig. 9.17.4
Fig. 9.17.5
FLOW
ACCUMULATION
ACTIVATION TIME
[s]
Esc
Mod
0
FLOW
Esc
Mod
PRE INPUT
ACTIVATION
NO
FLOW
Esc
Mod
RELAY 4 MODE
NONE
To Next Page
Loading...
