9 - Operation and use
88
5 - Outside outfeed belt operation
With this menu you can choose the operating mode for the outside conveyor belt located at the
end of the machine:
- PREREGULATED SPEED : the outside conveyor belt operates at the pre-set speed through
the (D) parameter.
- SYNCHRONISED SPEED : the outside conveyor belt operates at a speed that is
synchronised with the speed of the machine's outfeed belt.
6 - Outside outfeed belt stops management
You can regulate the operation times of the conveyor belt located at the end of the packaging
system through the following options:
- CONTINUOUS : the outside conveyor belt always stays active.
- WITH SEALING BAR : the outside conveyor belt always stays active except when the
machine performs sealing.
7 - Pre-set outside outfeed belt speed (D)
This allows you to adjust the speed of the outside conveyor belt located at the end of the
packaging system.
Fig. 9.13.33
Fig. 9.13.34
OUTSIDE BELTS
OUTSIDE BELT
OUTFEED OPERATION
Esc
Mod
PREREGULATED SPEED
OUTSIDE BELTS
OUTSIDE OUTFEED
BELT STOPS CONTROL
Esc
Mod
CONTINUOUS
To Next Page
Loading...
