Smipack FP6000CS - Page 87

87
2 - Pre-set outside infeed belt speed (A)
This allows you to adjust the speed of the outside conveyor belt located in front of the
packaging system.
3 - Turn on time for the outside infeed belt (B)
This allows you to set the turn on times for the outside conveyor belt located in front of the
packaging system.
4 - Turn off time for the outside infeed belt (C)
This allows you to set the turn off times for the outside conveyor belt located in front of the
packaging system.
Fig. 9.13.30
Fig. 9.13.31
Fig. 9.13.32
OUTSIDE BELTS
OUTSIDE PRE-SETTING
INFEED BELT SPEED
[%]
Esc
Mod
xxx
OUTSIDE BELTS
OUTSIDE INFEED BELT
SWITCH ON TIME
[s]
Esc
Mod
x.xx
OUTSIDE BELTS
OUTSIDE INFEED BELT
SWITCH OFF TIME
[s]
Esc
Mod
x.xx