Smipack FP6000CS - Page 99

99
6 - Adjusting display brightness
You can adjust the brightness of the display from 0 to 10.
>Change password
It is possible to change the password based on the access level on the PCB. (for example if
you access level 2 it is possible to change only the password PROGR).
Enter the new password and press in order to save.
Fig. 9.16.6
Fig. 9.16.7
SET LCD
Esc
Mod
DISPLAY BRIGHTNESS
10
Esc
Mod
ACTIVE LEVEL [2]
MAIN MENU
PASSWORD
XXXXX