11
Operating via a web browser within your own network
Configuration page
Here you can make necessary configurations for the optimal monitoring and evaluation of your plant. You
can also view information on the power output, yields and the device.
Log in button
You can entered a password protected section by clicking on the log in button (at the bottom right corner
of the screen) and entering your user and password. (Refer to the Access Control section for more infor-
mation)
Fig.: Log in button with selection box
Hide arrow
The “Hide Arrow” (on the right of the header bar) allows you to increase the amount of the page displayed
in the browser by hiding the Welcome header.
Fig.: Header bar with the “Hide Arrow”
Access control
Access protection for different parts of the Solar-Log™ can be configured in this menu. The following sec-
tions can be restricted with a pin code or password
•
Access protection for the display
•
Access protection for the browser menu
•
Displaying advanced configuration
Access protection for the display (only Solar-Log 1000, 1200 and 2000)
A pin code can be activated to restrict access to the Solar-Log™’s display. The pin code may contain a
maximum of 8 numerical digits.
Access at the display can be restricted for the entire display or just the settings section.
Procedure:
•
Enter the pin code
•
Enter the pin code again
•
Select restricted Sectionsby checking them.
•
SAVE settings
To Next Page
Loading...
Need help?
General
