44
Operating via a web browser within your own network
Fig.: Feed-In Management - Feed-balance
The Feed-balance tab displays when power output was fed into the grid and when power was purchased
from the grid. Negative values mean that the power was purchased from the grid and positive values mean
that power was fed into the grid.
The power reductions are displayed in a table with two columns in the
PM History tab.
•
Event from - to:
• The time and date that a power reduction was activated.
•
Power reduction:
• The power reduction as a percentage.
Two additional tabs can be accessed via the Power Management section:
Utility Meter
I/O Box
There is a detailed guide for this in the "Special Functions | Power Management" chapter of the Installation
Manual.
To Next Page
Loading...
