Solar-Log 2000 User Manual

83
Operating the Solar-Log 500 and 1000 via the Display
5.5.4 Optimizing the consumption of self-produced power
To specifically concentrate your power consumption at times
when there is sufficient power production, the
Solar-Log 1000 offers the option to automatically turn on and off up to 10 appliances as needed. The appli-
ances are displayed as "Switches" on the display.
The control of the devices is based on the current power surplus, e.g. "production minus consumption." If
no consumption meters are connected, the management is based purely on the power production values.
Note!
Refer to the Installation Manual for the switch settings or contact your installer.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal