Solar-Log 2000 User Manual

82
Operating the Solar-Log 500 and 1000 via the Display
5.5.3 Handling Alarm Notifications
You can acknowledge fault notifications in this menu.
Tap your finger on the display again.
•
The main navigation screen is displayed.
Tap on Diagnosis and then on Alarm Contact.
•
The alarm monitoring status is displayed.
Fig.: Alarm contact
Tap
on Acknowledge Alarm Manually.
•
The alarm notification stops.
After the fault has been resolved,
tap on Reset Alarm.
•
This resumes the operating mode.
Tap on Menu.
•
The main navigation screen is displayed.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal