46
Operating via a web browser within your own network
2.10.6 Accessing components
To access the Components menu, go to Diagnostic | Components.
Fig.: Components - S0 meter on interface A and B
The following tabs are available in the Components menu:
•
SO meter (see Fig.: Components - S0 meter on interface A and B)
•
Alarm contact (only with the Solar-Log™ 2000) (see Fig.: Alarm contact)
•
Wireless Package (only when connected and the Wireless package visible has been activated) (See
Fig.: Connection Test - Wireless Package)
All of the SO meters connected to the Solar-Log™ are listed in the Diagnostic | Components | S0-Meter
menu. The following values are displayed in the Pulse meter box:
•
Total number of pulses for the SO meter since the last restart of the Solar-Log™ (first number)
•
Number of pulses since the menu has been accessed (second number)
•
Pulse number interval in a minute (third number)
Note!
The Solar-Log™ restarts every night to reorganize the data. This means the total
number of pulses for the SO meter is reset to zero every night.
To Next Page
Loading...
Need help?
General
