7
General Information
1 General Information
This user manual is intended to assist you in the operation of the Solar-Log™. The yield data from the Solar-
Log™ can be displayed in several ways:
•
via a web browser in a local network (LAN) (Chapter 2)
•
via the display (touch screen: only Solar-Log 1000, 1200 and 2000) directly on the device (Chapter
4)
•
via the Internet (Chapter 5) or
•
with the Solar-Log™ App (Chapter 6 and 7)
Our product documentation is being constantly updated and expanded.
The current versions of the documents can be downloaded from our website:
www.solar-log.com.
The descriptions in this manual refer to firmware version 3.1.
Note:
Some of the descriptions contain screenshots with the LCD view in the top-left.
The view is from the transfer of data from the LCD display on the Solar-Log™. The
LCD on the device, however, is only available with the Solar-Log 300, 1200 and
2000.
1.1 The necessary steps for precision monitoring of your PV plant with the
Solar-Log™
•
Connecting and detecting inverters, refer to the "Inverter Connection Manual" and the "Configur-
ing Connected Devices" chapter in the
Installation Manual.
•
Configuring inverters, generator output, MPP Trackers and module fields, refer to the "Configuring
Connected Devices" chapter in the
Installation Manual.
•
For configuring the notification function and status messages from the inverter, refer to the "Con-
figuring Notifications" chapter in the
Installation Manual.
•
For activating and configuring performance monitoring, refer to the "Configuring Connected De-
vices" chapter in the
Installation Manual.
Note:
The Solar-Log needs a continuous supply of electricity to avoid data loss and to
ensure precision monitoring of the PV plant
To Next Page
Loading...
