Solar-Log 2000 User Manual

68
Operating the Solar-Log 1200 and 2000 via Touch Display
4.7 Accessing the USB menu
Access the USB menu from the navigation menu on the left. by tapping on the Settings symbol.
Fig.: Menu Settings
This brings you to the main Settings menu. Tap on USB.
The sections:
•
Start
•
Basic settings
•
Advanced settings
are described in detail in the chapter "Direct Device Configurations" in the Installation Manual.
Fig.: USB menu

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal