Solar-Log 2000 User Manual

88
Operating the Solar-Log 500 and 1000 via the Display
5.7 Changing settings in the configuration menu
The configuration menu allows you to change settings and to make adjustments to the device's software.
The device should be completely configured by your installer. However, it can happen that you need to
make later changes, such as changing the password or adjusting the network settings.
•
Contact your installer for changes to your configuration.
•
If you would like to make the changes yourself, you can download the Installation Manual from our
website.

Solar-Log 2000 Specifications

General

Device Type	Data Logger
Max Inverters	100
Power Supply	24 V DC
Remote Monitoring	Yes
Ethernet interface	Yes
Communication Interfaces	RS485, Ethernet
Protocols	Modbus
Data Storage	Internal