STEP 10: Selecting a Title
F
or the final two steps in this tutorial (this tutorial goes up to eleven…), we will introduce the Projects system which allows you
to manage the way in which Matrix is configured for a particular recording, using the Matrix Remote. There are six tabs in the
Remote, the first of which (
#@>942BA) will be examined in this step, and the fourth of which (=A4@B 0B@8F) will be examined
in Step 11. For the '>B0;%420;;, 70==4;A and 1>CB tabs along with more detail on the #@>942BA and =A4@B 0B@8F tabs,
see Chapter 4, and for the * tab see Chapter 6.
A Project is simply a folder of recordings which are grouped together on whichever basis you choose, and a Title is a specific
recording within that Project. For example, the Titles might refer to different tracks within an album, and the Project might refer
to the album as a whole. All settings created within the '>B0;%420;;, 70==4;A and =A4@B 0B@8F tabs are specific to their
Title and therefore different Titles within a Project can have completely different settings. It is therefore essential that whenever
you change any of the settings in and of these tabs, you make sure you are editing the correct Title.
The left half of the
#@>942BA tab contains the main Projects folder. Matrix comes with one Project, which in turn contains one
Title:
‰ Double-click on the main #@>942BA folder to expand it.
‰ Double-click on #@>942B to expand the Project.
‰ Highlight the
'8B;4 folder which appears and press the "?4='8B;4 button at the bottom of the screen. This makes '8B;4
the Current Title - in other words it becomes the Title under which any configuration within the '>B0;%420;;, 70==4;A
and =A4@B 0B@8F tabs is stored.
You will notice that Project 1 and Title 1 are listed as the C@@4=B#@>942B and C@@4=B '8B;4 at the top and bottom of the
window as well as in the !>B4A section of the tab, as shown above.
You are now ready to start configuring Matrix for
'8B;4.
Chapter 2 - Getting Started
26
Matrix
2
Owner’s Manual
To Next Page
Loading...
Need help?
General
