SSL Soft Keys
S
oft keys are buttons which can have different functions assigned to them, depending on which soft key set is active.
There are a number of Matrix settings which are accessed
via the SSL set of soft keys. The soft key area of the desk is
l
ocated below the counter display in the centre section, and
comprises 16 buttons above and below the digital scribble
strip which runs across the whole desk.
The scribble strip in between the button rows indicates
what functions are currently assigned to them: the upper
row of the display refers to the row of buttons above it, and
the lower display to the row of buttons below it.
There are six sets of soft keys, comprised of five user-definable
sets and the SSL set. The soft key set which is currently assigned
to the soft key area is selected using the
&"',&'&
buttons, located on the right-hand side of the centre section, below
the main soft key area (shown left). The SSL set is selected by
pressing the && button, below the (&% buttons. It will light
to indicate that it is selected. To exit the SSL soft keys and return
to the previously selected User set, press the && soft key button
again.
Note that the && button overrides the (&% buttons. However, the previously selected (&% set indication is retained
along the top row of &"',&'& buttons as a reminder of which set will reactivate when the SSL set is deactivated.
For a description of the user-definable soft keys, see Page 97.
The SSL soft keys are arranged in menus, with the top row of soft keys acting as menu selectors and the bottom row accessing
functions within the currently selected menu.
There are eight menus of SSL soft keys, labelled:
MonOpt
,
Mon
,
Meters
,
Auto
,
TR
,
IP, Misc
and
Links
.
The settings configured within these menus are detailed over the following pages.
When no soft key menus are active, the soft key display indicates the Current Project and Title (see Page 48).
To Next Page
Loading...
Need help?
General
