Chapter 4 – The Matrix Remote
In this chapter, we will examine how the Matrix configuration and session information can be controlled and managed in the Matrix
R
emote.
For details of installing the Matrix Remote software, see Chapter 1.
Introduction to the Matrix Remote
There are six tabs in the Remote window:
- #@>942BA is where you select the current Project and Title, and where you administrate the data related to specific
Projects and Titles, including the data held within the '>B0;%420;;, 70==4;A and =A4@B 0B@8F tabs.
- '>B0;%420;; manages the storing and recalling of console settings.
- 70==4;A allows you to label the console’s analogue channels.
-
=A4@B 0B@8F controls the routing of channel inserts.
- * configures the protocol used to link Matrix with your DAW, along with its soft key assignments.
- 1>CB displays the Matrix console and Remote software versions currently installed, and contains useful short cuts to the
SSL website for product support, FAQs, registration and downloads.
This chapter deals with those tabs which are concerned with session-specific data, namely the #@>942BA, '>B0;%420;;, 70==4;A
and =A4@B 0B@8F tabs. The * tab is related to the basic configuration of Matrix rather than to specific sessions, and is
examined in Chapter 5. The 1>CB tab requires no further explanation.
Note that the Matrix configuration data controlled from the Remote is stored on the SD card in the back of the Matrix console
(see Page 2), not on the computer hosting the Remote.
Chapter 4 - Matrix Remote
53
Matrix
2
Owner’s Manual
To Next Page
Loading...
Need help?
General
