Standard Profile Soft Key Assignments
Soft Key Overview
In the main control section of the console is a two row LCD display with 8 switches above and below. All of these 16 ‘Soft Keys’
can be programmed to send either DAW specific MIDI commands or keyboard shortcuts. The top row can also be programmed
to act as ‘Menu’ keys for the lower row of switches, up to 5 sets of Soft Keys can be stored with each Profile. The Standard Profile
for each protocol includes a suggested set of keys for the top, or Default, set. Some profiles may come with more keys assigned
t
o the User 1 and User 2 layers. The assignments for the standard layer is described below for each of the default Profiles.
Chapter 6 describes how to customise the Soft Key assignments to suit your own needs.
Please refer to your DAW’s HUI or MCU protocol section of their manual for a full understanding of control capabilities.
Pro Tools Standard Profile
Main Soft Key Page
Below are the assignments for Matrix’ Standard key set. You are in the Standard Key Set when the User 1, User 2, User 3 or
User 4 keys are not selected.
Chapter 5 - DAW Control
81
Matrix
2
Owner’s Manual
< Prev Locates to previous marker
Next > Locates to next marker
V-Pot Opens the V-Pot menu
I/O Opens the I/O menu
MemLoc Opens/closes the Memory Locations window
Big C Opens/closes the Big Counter window
AutoEn Opens the AutoEn Menu
AWind Opens the Automation Window
Edit Brings the Edit window to the foreground
Mix Bring the Mix window to the foreground
Sus G Suspends/Suspends Groups
Plugs Shows/hides the Plug-In window of selected plug-in
Trans Shows/hides transport window
RecRdy Record-ready for all tracks
P Roll Toggles Pre and Post Roll on/off
Click Toggles the metronome on/off
To Next Page
Loading...
Need help?
General
