Managing Titles
Creating a Title
To create a new Title, simply press the !4E'8B;4 button and a new Title pop-up window will
appear. This will create a new Title in the currently selected Project.
To create a new Title in a different Project, first open another Title in the desired Project using
"?4='8B;4, then click !4E'8B;4.
The !4E'8B;4 pop-up Window will prompt you for the following:
'8B;4!0<4 – Name your New Title
70==4;!0<4A – Allows you to choose between the following:
> 0AB(A43 - Imports the same analogue channel names as used in the currently selected Title.
> 450C;B - Names the channels in consecutive order ‘70=’, ‘70=’ `etc.
> 8AB>5#@4A4BA - Underneath the options for 0AB(A43 and 450C;B, you will see a list of
any saved Channel Name presets you have created using the &0D470==4;!0<4A0A#@4A4B
option in the Channels page of the browser. See later in this chapter for more information on this.
=A4@B 0B@8F – Allows you to choose between the following:
> 0AB(A43 - Imports the same Insert Matrix as the currently selected Title. The devices will be
inserted in the same positions.
> 450C;B - Returns all devices to be available in the right-hand list.
> 8AB>5#@4A4BA - Underneath the options for 0AB(A43 and 450C;B, you will see a list of
any saved Insert Matrix presets you have created using the &0D4=A4@B 0B@8F0A#@4A4B option
in the Insert Matrix page of the browser. See later in this Chapter for more information on this.
Opening a Current Title
When Matrix is turned on, it will automatically open the last loaded Title. To load a different Title onto Matrix (and therefore
into the rest of the Remote), highlight the required Title folder and press the "?4='8B;4 button located at the bottom of the
screen. Alternatively, right-click (Mac: ctrl+click) on the Title folder and choose "?4='8B;4 from the drop-down menu which
appears.
The Current Title and its Project is displayed in the right hand side of the #@>942BA tab, as well as in the top and bottom of the
Remote. It is also displayed in the soft key area of the console, when the SSL set is selected without any menus active.
Once the Title is loaded, the Matrix console will assume the channel names and insert routing within the Title. You can now also
edit session notes, and recall the Title’s Total Recall snapshots, as described in the rest of this chapter.
Note: Loading a song into the Remote does not automatically recall a Total Recall snapshot onto the Matrix control surface.
See Page 61 for details of how to recall a snapshot.
Chapter 4 - Matrix Remote
57
Matrix
2
Owner’s Manual
To Next Page
Loading...
Need help?
General
