Contents
Contents ii
About This Manual vi
What Else You Will need vi
Chapter 1 – Installation and Setup 1
Matrix Rear Panel Connections 2
Plugging Up Your Matrix 3
Audio Connections 3
Data Connections 4
Configuration of Data Connections 4
Matrix Network Connection Examples 5
Software Installation and Configuration 9
System Requirements 9
Software Installation (Mac) 9
Software Installation (PC) 9
Matrix Remote Configuration 10
DAW Layer Configuration 11
ipMIDI Configuration 13
Chapter 2 – Getting Started 15
Important Concepts 15
The Master Channel 15
Focus Modes 15
Preparing for the tutorial 16
STEP 1: Bringing Signal into the Channel 17
STEP 2: Routing to the Main Busses 18
STEP 3: Hearing your Signal 19
STEP 4: Sending to the Auxiliary Sends 20
STEP 5: Global Control of your DAW 21
STEP 6: Channel Control of your DAW 22
STEP 7: Sending Signal from the Channel Direct Output 23
STEP 8: Setting up Artist and Control Room Headphones 24
STEP 9: Listening Back to the DAW 25
STEP 10: Selecting a Title 26
STEP 11: Inserting Signal Processing into the Channel 27
Contents
ii
Matrix
2
Owner’s Manual
To Next Page
Loading...
