Spectra Precision Focus 6 - Settings

5 Menu Key
126 Spectra Precision Focus 6 5" Total Station User Guide
7. Press [<] or [>] to display the second solution.
8. To record the point, press
[ENT] when the required
solution appears.
9. Enter a Z coordinate if necessary. Press
[ENT] to
move to the PT and CD fields.
Sample records
CO,Int DD P1:486 HD:330.6020
CO, P2:7 HD:100.0000
CC,505,,236.5817,50.0461,0.0000,
Calculating a point-line intersection
1. Press
[4] or select Pt-Line in the Intersection menu.
2. Enter the first point name and press
[ENT], or press
the
MSR softkey to measure directly to the point.
3. Enter the azimuth, or press the
Pts softkey to
enter another point name on the line.
4. Enter the perpendicular point to the line, or press
the
MSR softkey to take a measurement to the
point.
5. To calculate the coordinates of the intersection
point, press
[ENT].
If P1 and P2 are 3D points, the Z coordinate of the
perpendicular point is calculated relative to the
P1-P2 slope.
6. Enter PT and CD then press
[ENT] to record the
point.
Sample records
CO,Int PtLine P1:38 AZ:90.00000+0.00000
CO, P2:506
CC,A-123,,4567.3080,200.1467,-1.2056,POT