Spectra Precision Focus 6 - Two-Point Resection Along a Known Line

4 Applications
80 Spectra Precision Focus 6 5" Total Station User Guide
– If you do not need to reset the HA, leave the
HA field blank and press
[ENT].
The display returns to the BMS.
Two-point resection along a known line
1. To enter the Known Line function, press [7] or
select
Known Line in the Stn Setup menu.
2. Enter a known point as P1.
If you enter a new point name, a coordinate input
screen appears.
Sight P1 and press
[MSR1] or [MSR2] to take a
measurement. Press
[ENT].
3. Choose how you want to define a known line:
– To define the line by entering P2
coordinates, press
[1] or select By Coord.
– To define the line by entering the azimuth,
press
[2] or select By Angle.
4. If you select
By Angle, the azimuth input screen
appears. Enter the angle value and press
[ENT].
A measurement screen appears.
5. Sight P2 and press [MSR1] or [MSR2] to take a
measurement. Press
[ENT].
After the measurement to P2 is completed, the
coordinates of the station are calculated.
6. To record the station, press
[ENT] or the REC softkey.