Spectra Precision Focus 6 User Manual

3 Getting Started
46 Spectra Precision Focus 6 5" Total Station User Guide
If the battery level is critically low, a message appears.
EDM measurement status
When you are taking measurements, the EDM measurement status shows the mode
that is being used.
When you display observation data, the EDM measurement status shows the mode
that was used when the data was collected:
If there is no icon, Prism mode is being used.
Communication port status
(This is only available when the optional Bluetooth is installed. See Optional Bluetooth
function, page 149.)
LCD backlight, laser pointer, beep sound, and contrast adjustment
Press the illumination key to open the 4-switch window and then press:
[1] to turn the LCD backlight on/off
[2] to turn the laser pointer on /off
[3] to turn the beep sound on /off
[4] to open the contrast adjustment window.
Do the following:
• To turn on/off each function, press [ENT] when the option 1, 2, 3 or 4 is selected or
directly press the
[1], [2], [3], or [4] key. Holding down the illumination key for one
second also turns on/off the LCD backlight.
• To move the cursor up and down, press [^] or [v].
Reflectorless mode
Bluetooth enabled
[ENT] / [4]
[ESC]
Switch setup window Contrast adjustment window

Spectra Precision Focus 6 Specifications

General

Brand	Spectra Precision
Model	Focus 6
Category	Measuring Instruments
Language	English