Spectra Precision Focus 6 5" Total Station User Guide 65
Getting Started 3
Creating a control job
A control job, or common file, stores coordinate data that is used by several field jobs.
To create a control job in the office:
1. Press
[MENU]. The MENU screen appears.
2. Press
[1] or select Job. The Job Manager appears.
3. Move the cursor to the job to use as the control
job.
4. Select the
Ctrl softkey.
5. Select the
Yes softkey.
When you enter a point name or number, the system
searches in the current job first. If the point is not found
in the current job, the search is automatically extended
to the control job. If the point is found in the control job, the selected point is copied to
the current job as a UP record.
Measuring distances
C
WARNING – Never look at the sun through the telescope. If you do, you may damage or
lose your eyesight.
C
WARNING – Precautions should be taken to ensure that persons do not look directly, with
or without an optical instrument, into the beam.
C
WARNING – Laser beam path should be located well above or below eye level wherever
practicable.
Note – For information on how to assemble the prism reflector, see Setting up the prism
reflector, page 36.