Spectra Precision Focus 6 - Creating or opening a job

3 Getting Started
62 Spectra Precision Focus 6 5" Total Station User Guide
Entering a code directly
1. To change the input mode to alphanumeric or
numeric, press
[MODE].
2. Use the keypad to enter the code.
Entering a code from the code stack
The code stack is a list of up to 20 recently used codes.
When you reboot the Focus6 5" total station, the code
stack is cleared.
To enter a code from the code stack:
1. Select the
Stack softkey when the cursor is in the
CD field. The stack appears.
2. To move the cursor to the code that you want to
use, press
[^] or [v].
3. Press
[ENT].
The selected code is copied to the CD field.
Entering a code from the code list
1. Select the
List softkey when the cursor is in the
CD field. A list of existing codes appear.
2. Press
[^] or [v] to highlight the feature code that you
want to use.
3. Press
[ENT].
A layer has an arrow at the end of the code label. If you
highlight a layer in the list and then press
[ENT], the
codes and layers in that layer are displayed.
When you return to the input screen, the selected code
is entered in the CD field.
Advanced feature: Searching for a code using the first character
Items are shown in alphabetic order. To find a code quickly when the code list appears,
use the first-character search. For example, to see feature codes that begin with T, use
the keypad to enter the letter T (press
[1] twice).