Spectra Precision Focus 6 User Manual

3 Getting Started
64 Spectra Precision Focus 6 5" Total Station User Guide
The following examples show how to enter various values:
B
Tip – The numerator and denominator that you enter are automatically converted to the
closest value from the following list: 0, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1/16, 3/16, 5/16, 7/16,
9/16, 11/16, 13/16, 15/16.
If the denominator is 16, it is not shown on the screen.
Creating or opening a job
To record data on the Focus6 5" total station, you must create or open a job.
Note – Before using the Focus6 5" total station for the first time, check that you are using
the required job settings.
Creating a new job
1. Press [MENU]. The MENU screen appears.
2. Press
[1]. The Job Manager appears.
3. Select the
Creat softkey. The Create Job screen appears.
4. Enter the job name.
5. To check the job settings, select the
Sett softkey.
You cannot change the settings for a job once you
have created the job.
6. Press
[ENT] in the last field of the Job Sett screen.
The new job is created.
Note – You can have a maximum of only 32 jobs.
Note – If either of the messages MAX 32JOBs or Data Full appears, delete at least one
existing job to free space. You cannot free space by deleting records in an existing job.
To enter... Key in...
65' 5 3/8"
[6] [5] [.] [5] [.] [3] [.] [8] [ENT]
65'
[6] [5] [ENT]
65' 5"
[6] [5] [.] [5] [ENT]
65' 5 3/8"
[6] [5] [.] [5] [.] [6] [ENT]
5 3/8" [0] [.] [5] [.] [3] [.] [8] [ENT] or [0] [.] [5] [.] [6] [ENT]

Spectra Precision Focus 6 Specifications

General

Brand	Spectra Precision
Model	Focus 6
Category	Measuring Instruments
Language	English