Spectra Precision Focus 6 5" Total Station User Guide 95
Applications 4
Measuring remote elevation
1. To enter the Remote Elevation Measurement
function, press
[5] or select REM in the Programs
menu.
2. Enter the height of target.
3. Sight the target point and press
[MSR1] or [MSR2].
Difference between “1:Cont.” and “2:Radial”
P1
P2
P3
P4
P3
P4
P2
P1
1:Cont.
(The preceding two points are
subject to calculation.)
2:Radial.
(Calculations are made with
reference to the first point.)
A prism is required
only at the sighting
(target) point
Station point
Sighting point
Arbitrary point
To Next Page
Loading...
