Spectra Precision Focus 6 - Page 140

5 Menu Key
138 Spectra Precision Focus 6 5" Total Station User Guide
B
Tip – If the Store DB setting is set to Both, the system also
deletes the corresponding coordinate data when you
delete an SS, SO, or CP record.
You can also delete raw data by pressing the DEL softkey
in the detailed display screen for the record.
Deleting coordinate records
In the XYZ screen, use
[^] or [v] to highlight the record
that you want to delete. Then press the
DEL softkey.
A confirmation screen appears.
To delete the selected record, press [ENT] or the Yes
softkey.
To cancel the deletion of data, press
[ESC] or the No
softkey.
B
Tip – You can also delete coordinate data by pressing the
DEL softkey in the detailed display screen for the record.
B
Tip – If the record that you want to delete is referred by
an ST record, a confirmation message appears.
Deleting station records
In the Station screen, use
[^] or [v] to highlight the record
that you want to delete. Then press the
DEL softkey.
A confirmation screen appears.
Press
[ENT] or the Yes softkey to delete the selected
record.