Spectra Precision Focus 6 User Manual

Spectra Precision Focus 6 5" Total Station User Guide 43
Getting Started 3
Returns to the previous screen.
In numeric or alphanumeric mode, deletes input.
Starts distance measurement, using the measure mode settings for the
[MSR1]
button.
Displays measurement mode settings, if held down for one second.
page 65
Starts distance measurement, using the measure mode settings for the
[MSR2]
key.
Displays measurement mode settings, if held down for one second.
page 65
Moves to the next available display screen.
Changes the fields that appear on the DSP1, DSP2, and DSP3 screens, if held
down for one second.
page 47
Displays the Angle menu. page 70
Displays the Station Setup menu.
In numeric mode, enters 7. In alphanumeric mode, enters 7.
page 82
Displays the Stakeout menu.
Shows stakeout settings, if held down for one second.
In numeric mode, enters 8. In alphanumeric mode, enters A, B, C, or 8.
page 71
Displays the Offset Point Measurement menu.
In numeric mode, enters 9. In alphanumeric mode, enters D, E, F, or 9.
page 89
Displays the Programs menu, which contains additional measuring programs.
In numeric mode, enters 4. In alphanumeric mode, enters G, H, I, or 4.
page 50
In numeric mode, enters 5. In alphanumeric mode, enters J, K, L, or 5. page 52
Displays RAW, XYZ, or STN data, depending on your setting.
In numeric mode, enters 6. In alphanumeric mode, enters M, N, O, or 6.
page 55
Executes the function that is assigned to the
[USR1] key.
In numeric mode, enters 1. In alphanumeric mode, enters P, Q, R, S, or 1.
Executes the function that is assigned to the
[USR2] key.
In numeric mode, enters 2. In alphanumeric mode, enters T, U, V, or 2.
page 53
Opens a window where you can enter a code. The default code value is the
last code entered.
In numeric mode, enters 3. In alphanumeric mode, enters W, X, Y, Z, or 3.
page 50
Button Function See ...

Spectra Precision Focus 6 Specifications

General

Brand	Spectra Precision
Model	Focus 6
Category	Measuring Instruments
Language	English