Spectra Precision Focus 6 - Page 59

Spectra Precision Focus 6 5" Total Station User Guide 57
Getting Started 3
1. Follow the steps in Others settings, page 132 to select the required language.
Once the instrument has rebooted the Regional
Configuration screen appears.
2. Press
[^] or [v] to highlight the required regional
settings and then press
[ENT].
3. If you do not want to change the current settings,
press
[ESC] and quit. The instrument continues to use the last settings that were
configured.
The settings affected by the Regional Configuration screen are:
The default regional configuration pre-set is “Europe” settings. See also Job settings,
page 113.
Category Setting Europe International United States
Angle VA zero Zenith Zenith Zenith
Resolution 5" 5" 5"
Distance Scale 1.000000 1.000000 1.000000
T-P Corr. On On On
Sea Level Off Off Off
C&R corr. 0.132 0.132 0.132
Coordinates Order ENZ ENZ NEZ
Label ENZ ENZ NEZ
Power Save Main Unit Off Off Off
EDM Unit Off Off Off
Sleep 5 minutes 5 minutes 5 minutes
Communication Ext. Comm Nikon Nikon Nikon
Baud 4800 4800 4800
Length 8 8 8
Parity None None None
Stop bit 1 1 1
Units Angle GON DEG DEG
Distance meters meters US-ft
Temp °C °C °F
Press mm Hg mm Hg In Hg
Rec Rec Data OFF OFF OFF
CD Field OFF OFF OFF
Add Const 1000 1000 1000
Others XYZ disp Fast Fast Fast
2nd Unit None None None
CD Input <ABC> <ABC> <ABC>