Spectroquant Pharo 300 - Page 102

Operation Spectroquant
®
Pharo 300
102
ba75703d07 04/2014
Rectangular cell:
Open the inner turn-up lid.
Insert the rectangular cell verti-
cally so it touches the bottom and
left edge of the cell shaft. The
opaque sides of the rectangular
cell must point to the front and
back.
The photometer has an external
light recognition. If there is too
much external light, a message
prompts you to close the cell shaft
cover.
The photometer starts measuring
automatically.
5 Using [Absorbance] <–> [Trans-
mission], switch over the display
from Absorbance to Transmission
or vice versa.
Absorbance
16.04.07 9:52
0.860
489 nm
10 mm
Setup Wavelength Transmission Reference
Transmission
16.04.07 9:52
13.8
%
489 nm
10 mm
Setup Wavelength
Absorbance
Reference