Spectroquant Pharo 300 - Saving Data as a Pdf File; Saving Kinetic Recordings, Spectra and AQA Files

Spectroquant
®
Pharo 300 Operation
151
ba75703d07 04/2014
4.11.10 Saving kinetic recordings, spectra and AQA files
After the following measurements, the Save dialog opens and prompts you
to save the data in a *.csv file:
 Kinetics
 Spectrum
 AQA3/MatrixCheck
If the data are not saved in *.csv format, they are lost when the measuring
mode is terminated.
Note
During a kinetic recording, the current measurement is always saved in the
file, "KineticsBackup.csv" for safety reasons.
4.11.11 Saving data as a pdf file
All data that can be printed (printer symbol on the display) can also be saved
as a pdf file. The pdf file contains the data that are also output to a USB
printer. Kinetic recordings and spectra are stored in the pdf file as a graphic.
To store data as a pdf file, use the <PRINT> key as for printing. When doing
so, the pdf print has to be set as the printer in the menu, <HOME>/General
setup/Data transfer/Printer/Function of PRINT key.
Subsequently, enter a file name and select the storage location (internally
folder DataB or USB memory device).