Spectroquant Pharo 300 - Inverting Filters

Spectroquant
®
Pharo 300 Operation
149
ba75703d07 04/2014
Note
Alternatively, you can hide
measurement datasets that meet the specified fil-
ter criteria with the Selected values: invert selection function (see section
4.11.8).
4.11.8 Inverting filters
With the Selected values: invert selection function you can hide
all measure-
ment datasets that correspond to the specified criteria of the filter (see sec-
tion 4.11.7).
Note
You can use this function to select and delete measurement datasets no lon-
ger used.
The Measurement data memory
list is displayed. All measurement
datasets corresponding to the fil-
ter criteria are hidden.
<HOME>
Concentration,
Absorbance / % Transmission, or
Special / Multi wavelengths
– [Setup]
– Measurement data
memory
– Setup
– Selected values:
invert selection
Measurement data memory
16.04.07 9:52
27.03.07 14:00 3.50 mg/l Ni Administrator
AutoStore
27.03.07 14:05 3.64 mg/l Ni Administrator
AutoStore
27.03.07 14:10 3.69 mg/l Ni Administrator
AutoStore
27.03.07 14:15 3.72 mg/l Ni Administrator
AutoStore
27.03.07 14:20 3.72 mg/l Ni Administrator
AutoStore
27.03.07 14:25 3.75 mg/l Ni Administrator
AutoStore
27.03.07 14:30 3.73 mg/l Ni Administrator
AutoStore
27.03.07 14:35 3.80 mg/l Ni Administrator
AutoStore
27.03.07 14:40 3.78 mg/l Ni Administrator
AutoStore
Filter ✓
Memory space usage: 9/
Setup Single value Delete